The cover should be very firm and tight-fitting. Look for connectors that seem lose or scratched up. You can get a good idea of how much dirt and dust the camera’s been exposed to by carefully examining this area. If the camera was cleaned up with an alcohol-coated cloth, this area was probably missed. Inspect the area beneath the rubber cover. If it’s worn or loose-fitting, it indicates wear and it may need replacement, which is easy, but costs money. This covers the HDMI, USB and other connectors. Inspect the rubber cover on the left side of the camera. Don’t try to peel the rubber off, but lightly run a finger along the edges to make sure it isn’t loosening, especially around the top of the grip area and the top of the camera rear. Do not try to peel it off, but inspect the edges of the rubber coverings on the camera back and front because if they begin to come loose, they can fully peel off which is bad. If it looks like water has exited either of those holes, you aren’t going to buy this camera. There are also two open holes, I think for draining water. There should be seven screws on the camera bottom, and an eighth inside the tripod socket. There should be no dirt inside the tripod socket. This area should be clean the sticker should not be peeling off and it should be perfectly shiny and readable, and there shouldn’t be nicks on the plate surrounding the tripod socket. Look at the ribbed plate around the tripod socket and the stickers next to this plate for signs of wear. If you see a serious scuff or ding, it could mean that the camera has been dropped, and you might want to pass. Right off the bat, any shininess drops the camera from a 10 (Mint) to a 9+ or 9. These will show up as “brassing,” or shiny spots where the surface is beginning to wear off. The first signs of wear will appear at the “lips” around the edges on the bottom. It’s impossible to use a camera without putting some light scratches on the bottom of the camera. This is where you’ll find the most scratches by far. This is probably going to tell you more than any other test. Look for scratches, dents and other signs of wear. Analog audio/video cable (which you’ll never use).Whether a given item is included is up to you and the seller, but get a look at every item before you start, because they are all part of the price negotiation Here is a list of typical things that are included. Inspect each item that comes with the camera. Small flashlight (a cell phone will do).Laptop computer (for the shutter count test).USB cable (MiniUSB to USB it should come with the camera).You and/or the seller must have the following items for your inspection: Maybe others will help me expand this guide into a general guide for other DSLR’s as well. Now that I’ve owned the camera for about six months, here are the inspection tips I’ve come up with.
#Canon 7d firmware 2.0.5 how to
For the details of these new functions, please see the “Version 2.0.0 improvements” in the history of past firmware updates.When I purchased my used 7D last summer, I tried to find tips online for how to inspect it, and I couldn’t find any. Updating the camera’s firmware to version 2.0.0 / 2.0.3 from version 1.2.5 or before, will incorporate many new functions into the camera. These phenomena will not occur in firmware version 1.2.5 or before. The fixes listed above are corrections for the phenomena experienced with firmware version 2.0.0. Corrects some errors in the message displayed on the LCD screen when saving RAW images developed in the camera (these errors do not appear in the Japanese and Korean language displays). Fixes a phenomenon in which the maximum number of images that can be captured in a burst may be less than the actual number displayed in the viewfinder.ģ. Fixes a phenomenon in which the camera stops working when the auto power off setting takes effect.Ģ.
#Canon 7d firmware 2.0.5 update
Canon UK released a new firmware update V2.0.3 for Canon EOS 7D.įirmware version 2.0.3 incorporates the following fixes.ġ.